How To Repair 4th Wheel Atmos Clock

NEVER move or shift the ATMOS Clock earlier locking the rest wheel with the locking lever ( A ) beneath the punch.

1/ POSITIONING:

Place the ATMOS Clock on a mantel-piece or a piece of piece of furniture which is level and sturdy.

2/ HOW TO Starting time AND Stop:

To start, button the locking lever ( A ) beneath the dial slowly and completely, from right to left. This starts the balance bike aquiver slowly. NEVER Bear upon THE BALANCE WHEEL ( B ). To terminate and lock rest wheel, push the locking lever ( A ) beneath the dial slowly and completely, from left to right. Never leave the locking lever in a "dead-middle" position.

3/ HOW TO LEVEL:

ATMOS Clock must ever be perfectly level to assure authentic timekeeping. First, put the clock in the place where it will remain - and then start the move, as described in Paragraph 2. The clock is level when the pointed brass pin ( C ), on the lesser of the balance wheel, points directly down to the bluish dot ( D ), on the base-plate of the clock. To adjust for true level - while the balance wheel is aquiver slowly - plow each of the ii thumbscrews ( Eastward ) ( E ), on the base of operations of the clock. Turn them alternately until the pin is centered over the blue dot.

4/ HOW TO SET:

Push button the infinitesimal hand with your finger clock-wise. NEVER PUSH THE 60 minutes Hand.

five/ HOW TO REGULATE:

On the top of the clock is a pointed lever which can exist fix over gradations from "Due south" (Dull) to "F" (Fast). Permit your clock to run one calendar week without setting, then regulate as necessary.

DON'T touch the balance bike or the clock mechanism.
DON'T touch the 60 minutes hand. Set the clock by moving minute hand just.
DON'T move or shift the ATMOS Clock earlier stopping and locking the rest wheel with the locking lever.